Table of Contents:
Best BOSTITCH Flooring Staplers For Engineered Hardwood:
- Best Value: BOSTITCH EHF1838K
- Most Durable: BOSTITCH MIIIFS
- Editor’s Choice: BOSTITCH LHF2025K
If you are a professional flooring expert, home improvement contractor or renovator, gather here for the best information yet. Looking for that perfect flooring stapler that does not disappoint and gets the job done?
Well, we present to you our Review of 3 Best BOSTITCH Flooring Staplers for Engineered Hardwood. The brand BOSTITCH should not sound strange to you because it has been around since 1896.
A brainchild of Stanley Bostitch, the BOSTITCH company is an American firm which focuses on the design and production of different tools and accessories.
They manufacture fastening tools like staplers, staple guns, nailers, riveters and glue guns. They are also into the production of fasteners like nails, screws and staples.
Their range of products cut across the home, office, construction and industrial sites. Today’s post selected three of their products and reviewed them for decision making.
At the end of this post, you should be well enlightened at to which one to buy from the 3 Best BOSTITCH Flooring Staplers for Engineered Hardwood this year 2023.
The 3 Top Rated BOSTITCH Flooring Staplers [2023 Reviews]:
BOSTITCH EHF1838K Review:
The EHF1839K comes to you as a convenient tool with low maintenance feature. With knobs for different floor thicknesses, this bad boy can fire staples through any engineered hardwood. Looking for a versatile and easy management tool? Get hold of the EHF1838K.
Features:
Oil-Free Maintenance:
This tool does not require oil for operation which eliminates regular maintenance. Since it’s oil-free, the risk of getting oil stains all over the surface has been eradicated.
Ultra-Quiet:
The EFH1838K operates without noise because the rear exhaust suppresses the noise and channels air away from the user.
Faster Installation:
This BOSTITCH stapler has a high visibility tongue engagement which makes for speedy installation.
Non-Marring Tip:
With the non-marring profile tip of this stapler, you are sure to get a scratch-free floor after use.
Tool-Free Adjustment:
The EFH1838K comes with adjustable knobs for setting the tool to work on various floors. It can work on solid hardwood of thickness from 5/19 to 7/16-inch and engineered bamboo of thickness ½ to 5/8-inch.
Specifications:
- Manufacturer: Bostitch
- Model Number: EFH1838K
- Net Weight: 3.47 pounds
- Dimension: 10.13 x 3 x 10 inches
- Operating Pressure: 70 – 120 psi
- Power Source: Air
- Fastener Type/Gauge:18 GA Staples
- Fastener Length: 1- 1½ inches
- Magazine Capacity: 100 staples
- Depth Adjustment: Present
- Dry Fire Lockout: Absent
- Firing Mode: Sequential
- Jam Clearance: Tool Free
- Warranty: 7-Year Limited Warranty
BOSTITCH MIIIFS Review:
With the MIIIFS on your hand, you can do floor nailing without hassles. It works fast and efficiently driving nails and cleats into wood surfaces. It offers a comfortable grip to the user and the needed stability. Use it for both solid hardwood flooring installation and engineered hardwood too.
Features:
Stable Base:
It comes with an extra-wide composite base plate (½ and ¾-inch included base plates). The plates offer stability to the tool during operation.
Ergonomic Handle:
Equipped with a long handle that provides extra comfort and control to the user.
High Productivity:
It offers high-speed, mallet actuated pneumatic operation. This operation raises productivity over manual methods.
Specifications:
- Manufacturer: Bostitch
- Model Number: MIIIFS
- Net Weight: 11.2 pounds
- Dimension: 17.25 x 3.13 x 14.88 inches
- Operating Pressure: 70 – 90 psi
- Power Source: Air
- Staple Crown: 0.5 inch
- Fastener Length: 1½ – 2 inches
- Magazine Capacity: 92 staples
- Depth Adjustment: Present
- Dry Fire Lockout: Absent
- Jam Clearance: Tool Free
- Warranty: 7-Year Limited Warranty
BOSTITCH LHF2025K Review:
In search of a device which does fast flooring installation without stains, then get the LHF2025K. This 20GA stapler works fast and leaves no oil stains on the flooring surface. Its oil-free maintenance, it doesn’t scratch the work surface and offers convenience during use.
Features:
Oil-Free:
The LHF2025K requires no frequent maintenance owning to the oil-free operation feature.
Swivel Air Fitting:
The air fitting does not get in the way during operation because of it swivels. The swivel makes it easy to maneuver and also the air fitting comes with internal filter for smooth operation.
Non-Marring Tip:
Its non-marring profit tips provide scratch-free floors.
Speedy Installation:
With its high visibility tongue engagement, installation becomes faster using this tool.
Tool-Free Adjustment:
With its adjustable knobs, you can adjust the stapler based on floor thickness from ¼ to ½ inch without the need for tools.
Rear Exhaust:
It comes equipped with an ultra-quiet rear exhaust which channels air away from the user.
Specifications
- Manufacturer: Bostitch
- Model Number: LHF2025K
- Net Weight: 2.9 pounds
- Dimension: 10.13 x 3 x 8.25 inches
- Operating Pressure: 70 – 120 psi
- Power Source: Air
- Fastener Type/Gauge: 20 GA Staples
- Fastener Length: ½ – 1 inch
- Magazine Capacity: 100 staples
- Depth Adjustment: Present
- Dry Fire Lockout: Absent
- Firing Mode: Sequential
- Jam Clearance: Tool Free
- Warranty: 7-Year Limited Tool Warranty
FAQs:
Q: How Do You Use a Bostitch Floor Stapler?
A: Using the Bostitch Floor Stapler require caution and knowledge of the tool when you are installing pre-finished flooring. Here are the steps:
- Pull up on the base plate and let it align perfectly with the tongue of the board
- Wear safety glasses before using any power tool
- Load the stapler with the right type of staples for the wood to be stapled and you are ready to go.
- Hook up with the air compressor and we see how it works
- It comes equipped with a safety trigger that needs to be depressed to actuate the tool. The trigger prevents accidental firing of the tool when it is dropped or bumped. Without depressing the trigger, the tool will not fire. Pick up the mallet and ready to fire.
- Place the mallet on the hammer cap and aim properly. With the safety trigger depressed, aim the mallet at the center of the hammer cap and hit it. Note that the more power you apply the better, but not way too much power.
- Hit the mallet on the hammer cap and see it fire the staple into the wood.
Q: Which Bostitch Flooring Stapler Should I Buy?
A: The question as to which Bostitch Flooring Stapler to buy can be answered by you the user. It depends on your preference especially since the staplers are made by one manufacturer – Bostitch. Out of the three of their top brands, you can pick any of it and whichever one you pick will work for you. Placing them side by side, you will discover the differences and similarities which will stand as criteria for you to choose.
| Criteria | EHF1838K | MIIIFS | LHF2025K |
| Weight | 3.47 pounds | 11.2 pounds | 2.9 pounds |
| Operating Pressure | 70-120 psi | 70-90 psi | 70-120 psi |
| Fastener Type/Gauge | 18 GA Staples | 15.5 GA Staples | 20 GA staples |
| Fastener Length | 1 – 1½ inches | 1½ – 2 inches | ½ – 1 inch |
| Magazine Capacity | 100 staples | 92 staples | 100 staples |
| Uses | Solid Hardwood, Engineered hardwood and Engineered Bamboo Flooring | Solid and Engineered Hardwood Flooring | Engineered Hardwood and Laminate Flooring |
From the above table, you can see the differences that exist among the three flooring staplers. Hence you should be able to determine the one to buy based on some factors. These include the job at hand, available features, the type of flooring you are working on and so on. Also, you should be aware that your budget also happens to be an imperative factor.
You must know that the three might appear similar but vary in terms of the price tag. The bottom line remains that whichever on you end up buying will serve well.
Q: What Kind of Nailer Do You Use for Engineered Hardwood Floors?
A: When it comes to engineered hardwood floors, the nailer you can use on them will be 18 or 20 gauge. However, with the nailer, you need to select the right staples or cleats to get the best result. The following nails and staples are recommended as per the wood thickness:
- ½-inch engineered floors with a pneumatic hardwood nailer: Use 2-inches cleated nails.
- ½-inch engineered floors with a staple gun: We recommend you to use a ¼-inch crown x 1¼-inch to 1½-inch long staples.
- 3/8-inch engineered floors: Use staple/cleats of a minimum of 1-inch.
- 9/16-inch engineered floors: We recommend you use nails/staples with a length of between 1¼-inch to 1½-inch long.
Conclusion
If you were able to read this post to this point means that you have been enlightened. It also shows us that you are looking for one of the 3 Best BOSTITCH Flooring Staplers for Engineered Hardwood.
Hence, we congratulate you because you will never go wrong in your purchase decision. The brand we x-rayed today rank among the best in the world and you can take that name to the bank.
We hope with this review you will click the Buy Now Button and add one of those bad boys to your tool arsenal. Thank you for reading and do comment and share this post.
See Also: